Providing and fixing of modular table with work top made of high gloss finish 25mm thickness laminated particle borad of grade II of IS 12823 of approve decorative color laminate on front, both end of work top shall be supported by 60x15x1.6mm 304 grade ss tubular pipe frame loop leg with levlers. both side leg connetced by 40x20x1.6mm ss tubular pipe.Worktop shall have flat edges duly paseted of 2mm thick pvc edge bending , rest part of pre-laminted board of flat edges sealed with 1mm - 2mm thick machine pasted PVC beading duly pasted on through feed machine on 200 deegree celcius temp. Pre-laminated particle board of grade II of IS 12823 Modesty panel of 18mm thick clad with decorative high gloss laminate on both side , edges shall be sealed with pvc edge beading. Complete table having knock down system fittings. Side table with drawer unit shall be of size W1200 X D500 X 750mm supported by 40x20x1.6mm ss pipe, side table top made of high gloss finish 25mm thickness grade II of IS 12823 of approve decrative color laminate on front, drawer unit top made of 25mm thick in high glsoss finish and rest carcass, back, shuuter and drawers shall be made up of 18mm thick. laminated particle board of grade II of IS 12823 in high gloss finish. Drawer unit fixed with side table top of 3 drawer having size of W400XD480mmm. The drawer top , back and side panels including the drawer fasicas is made out Pre-laminated particle board of grade II of IS 12823 of 18mm thickness in high gloss finish , edges dully sealed with pvc edge beading ,drawers boxes are mounted on telescopic chanles slides to enable smooth operation of the drawer .The pedestal shall have central locking mechanism and big ss handel . The products should be tested as per BIFMA standards.The product should have ISO-9001:2000 and ISO 14001-2004 certifiaction.The boards used sholud meet international standards of quality and safety, indian standard IS 12823 grade II should meet long time loadbending , screw - withdrawl strength and moudulus rupture and modulus of elasticity bending test as per IS 2380 (Part 4 ,Part 13 and Part 14).