Providing and fixing of modular table with work top made of 25mm thick prelam partical of grade II of IS 12823 of approve decorative color laminate on front, both end of work top of 25mm thick shall be supported by 80x25x1.6mm ss tubular pipe frame leg . one end of worktop supported on side storage top with ss tubular pipe. Worktop shall have flat edges duly paseted of 2mm thick pvc edge bending , rest part of pre-laminted board of flat edges sealed with 1mm - 2mm thick machine pasted PVC beading duly pasted on through feed machine on 200 deegree celcius temp. Pre-laminated particle board of grade II of IS 12823 Modesty panel of 18mm thick clad with decorative laminate on both side , edges shall be sealed with pvc edge beading. Complete table having knock down system on kd fittings. Side uint/main table shall have one hydraulic deskport with provision of 6 amp three pin power point,voice, data , USB , HDMI and VGA point. Side storage unit shall be of size W1950XD600mm. storage cabinet made of 18mm carcass, back, shuuter and drawers shall be made up of 18mm thick. Pre-laminated particle board of grade II of IS 12823 storage shall have open shelf and 2 drawer in which drawers runs on telecsopic chhaanles for smooth opertaion of drawers, inner box of all drawers shall be made of 18mm thick same colour , all drawer shall have leather hadnles , drawer lock with front lock systems , storage shutter with hinges , handles and lock. Storage rest on ss pipe frame 80x20x1.6mm of 100mm high, 40x20x1.6mm ss pipe in front of storage between shutter/drawer . The products should be tested as per BIFMA standards.The product should have ISO-9001:2000 and ISO 14001-2004 certifiaction.The boards used sholud meet international standards of quality and safety, indian standard IS 12823 grade II should meet long time loadbending , screw - withdrawl strength and moudulus rupture and modulus of elasticity bending test as per IS 2380 (Part 4 ,Part 13 and Part 14).